How To Apply Bona Craft 2K Oil
If the floor has large or many unfilled gaps then pour the mixed oil into a tray and apply from the tray using a roller.
Gap-free floors are quickly and easily treated with a Bona Oil Squeegee or a stainless steel trowel.
Using a hammer, drive an awl or screwdriver through the top and bottom of the upper container and allow the content to run into the bottom container (min. 1 minute).
Remove the upper container and mix the content thoroughly.
Apply and distribute a thin coat of the mixed oil to the floor.
On large floors work in sections and overlap wet-on-wet.
Allow the wood to absorb the oil for 15-30 minutes and then buff the surface with a buffing machine equipped with a red or beige pad.
Make another pass with more oil if required to ensure that absorbent areas are saturated.
Allow another 15-30 minutes of oil exposure before removing surplus oil with cotton cloths fitted under a buffing machine.
Buff the surface with a Bona Woolpad for a flawless finish.
Let surface dry at least 8 hours* (coloured oil min 12h*) before resuming foot traffic.
Ensure good ventilation during application and drying.
Note: If you wish to overcoat the oil for extra protection please refer to the attached Data Sheet