- product information
A gap filler for gaps up to 2 mm wide.
Can be used with practically all wood species.
The filler should be mixed with wood dust from the actual floor being treated to produce a natural colour that blends in with the rest of the surface.
- technical specifications
Brand Bona No of coats n/a Drying Time 30 minutes Pack size 1lt MPN WF21001302 GTIN 4005094340014
• Works with all Bona finishing and oil systems
• Free of harmful solvents
• No unpleasant smell
• Fills the joints, but doesn’t slump
• Waterborne, but anti-corrosive (no rust stains)
• Dries quickly • Easy to sand
• Always the right colour of the joint
Before Using Bona Mix & Fill
The surface to be filled must be clean, dry and free from contamination.
New floors and old floors should be sanded back to bare wood.
A sandpaper grade no. 100-120 should be used for the final sanding of the wood.
The sanding dust from this sanding should be retained
How To Apply Bona Mix & Fill
Shake well prior to use.
Mix&Fill should be mixed with the retained sanding dust to a texture suitable for application using a steel spatula.
This should then be applied across the whole surface of the floor.
Larger joints may require additional applications.
N.B. Mix&Fill is not suitable for floors with joints larger than 2 mm.
Drying time: approx. 20 minutes at 20°C/55% R.H.
This time may be extended where deep or wide joints are filled.
After the Mix&Fill has dried the surface of the floor should be sanded back to bare wood using an abrasive grade no. 100-120 The The floor may then be treated using any of Bona finishes or oils.
- Additional Information