All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Bradite 5lt Roadline Paint Yellow

Bradite 5lt Roadline Paint Yellow
Excl. VAT: £56.62 Incl. VAT: £67.94

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details


A quick drying, universal road marking and line paint suitable for application on asphalt, concrete and brick, on roads, runways, car parks and sports facilities.

Bradite CR27 Road Line Paint is made purely with chlorinated resin making it highly durable and water resistant

technical specifications

Details

Brand Bradite
Application Brush, Roller or Spray
Sheen Level Eggshell
Coverage 5m2 per Litre
Touch Dry 10 minutes
Recoat 1 hour
Thinners TB34
MPN CR27
GTIN 5050173000265
overview

Details

  • • Good adhesion, surface dry in 10 minutes.
  • • Excellent abrasion resistance.
  • • No bleeding on asphalt or bitumen.
preparation

Details

Before applying bradite roadline paint

Substrates should be dust free and completely dry before coating.

When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance.

Power floated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness profile of 30-50 microns, or acid etched using Bradite TA37, or primed using Bradite Floor Primer ES40.

Please consult the product data sheet for more details.

High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate.

Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil.

Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge.

Cracks and pits should be filled using a suitable screed or mortar before painting. 

Application

Details

how to apply bradite roadline paint

For application on concrete or other absorbent substrates, the first coat should be thinned 15-20% with Bradite Thinner TB34 to allow penetration into the substrate.

1st coat ROADLINE CR27 (thinned) if required.

2nd coat ROADLINE CR27

For maintenance painting the 1st coat will be a touch up to bare areas.

While the coating will take light foot traffic after overnight drying, full cure may take 4 days at 20⁰C, and should not be subject to heavy traffic for at least 24 hours. 

For futher guidance please refer to Data Sheet

Additional Information
Datasheets

Details