How To Apply Cuprinol Ducksback
Stir thoroughly before use.
Try a test area first to ensure that colour and adhesion are acceptable.
Apply 2-3 coats evenly along the grain, avoiding overlaps.
Allow 2-4 hours between coats under normal weather conditions.
This product is wax enriched to repel water. R
ecoat within 2-3 days of previous coat. If a longer period elapses try a flat a test area to ensure product is not repelled.
Product should only be used on rough sawn timber.
Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried.
Please note that the colour in the tub may be different to the final shade when dry.
Where a strong colour change is involved, more coats may be required. If using more than one can it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.