- product information
• A single pack gerneral purpose high build fast drying primer
• Modified alkyd/zinc phosphate for general purpose, high build, fast drying primers for steel.
- technical specifications
Brand Dacrylate Pack Size 5ltr Application Spray , Brushing for small areas only Theoretical Coverage 5.33m² per litre at 75 microns Drying Time Touch Dry 20 Mins Film Dry 1 Hour Thinners Brushing Dacrylate R5 Thinners Thinners Spraying Dacrylate R5 Thinners Line No 13 - Line
before using dacrylate 13 line primer
Preferred method is abrasive blast to ISO 8501-1 (SA2.5).
Manual Clean: Chip, scrape and wire brush to remove all loose millscale, rust, etc. Degrease with Dacrylate Thinner R5.
how to apply dacrylate 13 line primer
May be applied by conventional or airless spray.
Up to 10% Dacrylate Thinner R5 may be added to obtain optimum spray characteristics.
Apply to an approximate wet film thickness of approximately 190 microns to achieve 75 microns dry film thickness.
Small areas and narrow sections can be brush applied.
Apply with a full wet brush, do not attempt to ‘brush out’ or ‘lay off’.
Overcoating: i) May be overcoated after 45 minutes or as soon as firm-dry with all white spirit based finishing coats (e.g. Dacrylate Vehicle and Machinery Enamels, QD2, Dacshield, etc) SEE NOTE 2 ii)
Fast-drying finishing coats based on stronger solvents (e.g Dacrylate QD3, QD1, etc.,) should be overcoated when primer is firm-dry but within 2 hours, or allow primer to dry overnight.
- Additional Information
DetailsDacrylate Product Guide Size: (2.86 MB)
Dacrylate 5lt Rapidac HiB Metal 13 Primer Data Sheet Size: (36.27 KB)