- product information
A highly durable, water-based flat matt finish. It has excellent coverage and opacity.
Suitable for all normal interior wall and ceiling surfaces, particularly those subject to high traffic such as corridors and stairwells.
It also has an ultra low sheen level, perfect for masking areas of uneven wall surface.
- technical specifications
Brand Dulux Sizes 5lt Coverage Up to 17m2 per litre Touch Dry Dependent on temperature/humidity Recoatable 2- 4 Hours Thinning This product can be thinned - see datasheet for full details. Application Brush, Roller or Soray MPN
Before Applying Dulux Trade Durable Flat Matt
Ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Remove all loose and defective paint.
Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues.
Rinse with clean water and allow to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer.
Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
Application & Thiining
Apply the product using a brush or roller
The paint can also be applied by coventional or airless spray (Refer to Data Sheet)
STIR THOROUGHLY BEFORE USE.
Seal new or bare surfaces with a thinned first coat of Dulux Trade Durable Flat Matt (up to 1 part clean water to 5 parts paint).
The normal finishing process is 2 full coats of Dulux Trade Durable Flat Matt
Previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient.
- Additional Information