how to apply leylands off white stabilising solution
Apply by brush one coat of Leyland Stabilising Masonry Primer liberally, brushing the material well into the surface.
Allow 16-24 hours to dry, and follow with two coats of the selected Truguard Exterior Masonry Coating.
Before applying Truguard Stabilising Masonry Primer to the whole surface, first carry out a test application to a small area. If this dries to a glossy film, thin with one part of White Spirit to two parts of Truguard Stabilising Masonry Primer and then test again in another small area.
It is important to ensure that a nonglossy, dried, sealed surface is produced.