how to apply leyland trade acrylic eggshell
Stir well before use.
On absorbent surfaces, the first coat should be thinned when necessary to ease application, taking care not to over-thin.
Suitable for application by brush, roller or spray.
Apply two full coats, allowing 3-4 hours between coats under normal conditions.
On certain surfaces a third coat may be necessary. For spray application, thin with clean water as required, using up to approximately 0.5 litres of water to 5 litres of paint.
Do not apply when air or surface temperature is below 10˚C. Conditions of high humidity can prolong the drying time.