How To Use Liberon Wax & Polish Remover
For best results soak a pad of Ultra Fine Steel Wool (Grade 0000) in Wax and Polish Remover, squeeze out the excess and working on a small area at a time, gently wash the surface going with the grain where possible.
Allow a few minutes for the Wax and Polish Remover to work, then while the surface is still wet use a clean lint-free cloth to wipe off all the old softened wax.
Repeat this process until all the old wax is removed. Allow 24 hours for the treated surface to dry completely before re-finishing.
This product may damage newly applied French polishes, lacquers, varnishes and sealers.
Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result.
Wear suitable heavy duty gloves. Do not pour into plastic containers or use on plastic or vinyl surfaces.
Dispose of used steel wool and cotton cloths outside to reduce any vapour build-up and fire hazard.
Do not use on water-based varnish.