All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Little Greene Floor Paint (Interior)

Little Greene Floor Paint (Interior)
Excl. VAT: £26.67 Incl. VAT: £32.00
- £57.50 - £69.00

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

Greens/Blues Off Whites/Neutrals Red/Pink Yellows/Browns Cool White Warm White Greys Neutral/Grey Purple/Black Peach/Orange

* Required Fields

Excl. VAT: £26.67 Incl. VAT: £32.00
product information

Details

Painting the floor is an easy yet dramatic way to change the feel of a room, and with most of the Little Greene colour range at your fingertips you can be as bold or a subtle as you like.

Floor Paint has an attractive and extremely tough mid sheen finish and uses our eco-oil recipe, which has been formulated using naturally occurring vegetable oils.

technical specifications

Details

Brand Little Greene
Pack Sizes 1lt, 2.5lt
Theoretical Coverage Approx 14 square meters per litre
Recommended number of coats 2
Surface Dry 4 Hours
Time to recoat 16 Hours minimum
Colour Availibility Almost all Little Greene colour ranges
overview

Details

  • • Environmentally-friendly
  • • Oil-based
  • • Hard-wearing and completely washable
  • • Can be used on wooden and concrete floors
  • • Gloss level - 50% (mid)
  • • Covers approx 14 square metres per litre (one coat)
  • • Available in almost all colours
preparation

Details

before using little greene floor paint

New wood:

For soft woods, knots should be sealed with knotting compound to prevent staining.

Apply one thinned coat (15% v/v with white spirit) to allow penetration into substrate, followed by the recommended two full coats.

Resinous hard woods require cleaning and treatment with Little Greene Aluminium Wood Primer (consult the relevant product data sheets for further details).

One coat of Little Greene Traditional Oil Primer Undercoat maybe required to prevent subsequent grin through of the aluminium wood primer when painted with light floor paint colours.

Ensure moisture content of the timber is below 15% before commencing application.

Damp wood should never be painted as this may give rise to blistering, flaking, cracking and premature coating failure.

Green oak should not be painted unless it has been weathered for at least 6 months.

Metals: New ferrous metalwork should be hand, or mechanically cleaned, to remove any surface rust before application of Little Greene Traditional Oil Primer Undercoat.

Non ferrous metals must be pre-treated or primed with an appropriate proprietary primer.

Existing paint finish:

Remove all loose and flaking paintwork.

Degrease with a suitable detergent solution, such as sugar soap, followed by clean water rinse.

Rub down thoroughly with a medium grade sand paper to provide a key and a defect free smooth surface, “feathering in” areas where paint has been removed.

Make good any repairs, sand and apply primer to exposed surface as appropriate.

Concrete:

Brush or vacuum clean surface to remove dust.

If concrete has been power floated, the surface must be either vacuum blasted or treated with a proprietary acid etch solution, to produce a profile, prior to painting.

Minor surface contamination, such as oil spots, maybe resolved through flame treatment.

Thin the first coat with ~15% v/v white spirit to allow penetration into the substrate then apply two full coats.

Application

Details

how to apply little greene floor paint

Stir thoroughly before use.

Do not apply to surfaces when the ambient temperature is below 5o C. Brushing:

Use a high quality natural bristle brush that is suitably sized for the project at hand.

New brushes should be conditioned by washing in clean white spirit and thoroughly drying with a clean, lint free, cloth

Additional Information
Datasheets

Details