All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Little Greene Intelligent Primer Undercoat

Little Greene Intelligent Primer Undercoat
Excl. VAT: £16.25 Incl. VAT: £19.50
- £31.67 - £38.00

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

Greens/Blues Off Whites/Neutrals Red/Pink Yellows/Browns Cool White Warm White Greys Neutral/Grey Purple/Black Peach/Orange

* Required Fields

Excl. VAT: £16.25 Incl. VAT: £19.50
product information

Details

A high opacity, low odour water based matt undercoat displaying excellent adhesion to existing aged alkyd finishes.

Highly recommended for use with Little Greene water based finishes for both internal and external applications.

technical specifications

Details

Brand Little Greene
Pack Sizes 1lt, 2.5lt
Theoretical Coverage 14 square metres per litre at 30 microns DFT (dry film thickness) (loss factors will apply in practice)
Recommended number of coats 1 or 2 as required
Touch Dry 1 Hour
Time to recoat 4 Hours minimum
Colour Availibility All Little Greene colour card colours
preparation

Details

Please refer to data sheet for full preperation instructions

Application

Details

Stir thoroughly before use.

Do not apply to surfaces when the ambient temperature is below 5o C or if there is a risk of rain during application or drying. To obtain good flow, apply generously but avoiding runs and sags.

Brushing: Use a high quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry. For intricate items, or where high ambient temperatures/high air flow conditions cannot be avoided, the open time maybe extended with a 10 to 15% (v/v) addition of a propriety water based paint conditioner. This advice is also applicable to large flat areas; however, use of a paint roller is the recommended application method in such cases.

Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces. Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing. When high ambient temperatures/high air flow conditions cannot be avoided, the open time maybe extended with a 10 to 15% (v/v) addition of propriety water based paint conditioner.

Spray Finishing:

 Conventional Thin with up to: 40%(v/v) water Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi)

Airless Thin with up to: 20%(v/v) water Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

Additional Information

Additional Information

Barrettine Clear