All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Little Greene Tom's Exterior Oil Eggshell

Little Greene Tom's Exterior Oil Eggshell
Excl. VAT: £27.50 Incl. VAT: £33.00
- £55.83 - £67.00

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

Greens/Blues Off Whites/Neutrals Red/Pink Yellows/Browns Cool White Warm White Greys Neutral/Grey Purple/Black Peach/Orange

* Required Fields

Excl. VAT: £27.50 Incl. VAT: £33.00
product information

Details

The preferred finish of one of our senior chemists, this exterior eggshell, opaque wood finish has excellent flow, giving a beautiful low sheen on woodwork and metalwork.

technical specifications

Details

Brand Little Greene
Pack Sizes 1lt, 2.5lt
Theoretical Coverage 14-16 square meters per litre (varies with surface porosity & texture)
Recommended number of coats 2
Surface Dry 2-3 Hours
Time to recoat 16 Hours minimum
Colour Availibility All Little Greene colour ranges
overview

Details

  • Available in all colours
  • Extremely durable, flexible finish
  • Weather resistant and completely washable
  • Suitable for exterior woodwork and metalwork
  • surface dry in 4 hours, recoat in 16 hours
  • Fully washable
  • Available in 2.5 & 1 Litre
  • Low sheen (15%)
preparation

Details

Please refer to data sheet for full preperation instructions

Application

Details

Thinning should only take place after the material has been thoroughly mixed.

Application and use should always conform with the codes of practice described in BS 6150 and BS 5493.

Stir well before use.

Thin with 0–5% white spirit as required. Lightly rubbing down between coats will remove any dust motes and other surface contamination, producing a near professional finish

Conventional Thin with up to: 40% (v/v) water. Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi) Airless Thin with up to: 20%(v/v) water Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

Brushing:

Use a high quality natural bristle brush, suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.

Roller:

Use a short nap mohair roller type sleeve for best appearance on smooth surfaces. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing.

Spray Finishing:

CLEANING THINNER Equipment should be cleaned immediately after use with white spirit. Conventional Thin with up to: 25%(v/v) white spirit Tip size: 1.60 to 2.00 mm (62 to 78 thou) Air pressure: 0.28 to 0.41 MPa (40 to 60 psi) Airless Thin with up to: 10%(v/v) white spirit Tip size: 0.28 to 0.54 mm (11 to 21 thou) Pressure at tip: 12.6 to 19.6 MPa (1800 to 2800 psi)

Additional Information
Datasheets