For Clothes, Upholstery & Non–washables
1. Test for colorfastness by spraying an inconspicuous area. 2. Blot wet stains with a clean, white cloth or paper towel, if possible. Remove loose grime. 3. Spray stain; wait at least 60 seconds. 4. Gently agitate (use brush if necessary). 5. Blot thoroughly with clean, white towel or cloth. Repeat if necessary. 6. For best results on carpet & non–washable materials, dry with a hair dryer on medium heat. 7. Launder or clean as manufacturer recommends.
DO NOT SATURATE. A small amount goes a long way. Apply according to the instructions above. Then place a clean, white cloth or paper towels over the treated area, followed by something flat and heavy like a phonebook. In a few hours, the towel will absorb any excess stain dampness or residue from the stain.
1. Spray stain thoroughly; wait at least 60 seconds. 2. Agitate if necessary (the back end of a toothbrush works well). 3. Thoroughly rinse out Lift Off with warm water. Repeat if necessary. 4. Launder as fabric recommendations allow.
For Walls, Countertops, Floors & Tile
1. Spray stain thoroughly; wait at least 60 seconds. 2. Wipe with a clean towel or rinse off. Repeat if necessary.