All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Osmo UV Protection Oil Natural & Oak

Osmo UV Protection Oil Natural & Oak
Excl. VAT: £18.14 Incl. VAT: £21.77
- £52.86 - £63.43

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £18.14 Incl. VAT: £21.77
product information

Details


Natural oil-based and microporous finish which does not crack, flake, peel or blister.

Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage.

External elements of weathering fade the natural colour of the wood to a grey patina over time, but UV-Protection Oil has been developed to resist against this, whilst maintaining the wood's natural appearance.

Ideal for windows, doors, cladding, fencing and other vertically structured joinery to block the greying process of the wood by a UV-protected factor of 12 in comparison to untreated wood.

technical specifications

Details

Brand Osmo
Pack sizes 750ml, 2.5lt
Colours Oak, Natural
Approx. coverage 16m²/L with one coat
No of coats 2x
Application Temperature/Drying Time +5°C to 35°C / 12 hours
MPN 425, 429
GTIN 4006850684786, 4006850772063, 4006850684793, 4006850772070
overview

Details

  • • Very water and dirt resistant
  • • Reduces wood swelling and shrinkage
  • • 420, 425, 428 & 429 contains biocides to prevent the growth of algae, mildew and fungal attack
  • • Microporous, breathable finish which does not crack, peel, flake or blister
  • • No sanding necessary for future applications

425 EXTRA OAK

Slightly pigmented to give even higher UV-resistance and consistency for oak. Contains biocides to protect against algae, mildew and fungal attack.

429 EXTRA NATURAL

Optimally balanced with special white pigments to retain the light natural character of oak, with the strongest UV-resistance. Contains biocides to protect against algae, mildew and fungal attack.

preparation

Details

Before Applying Osmo UV Oil

Wood surface must be clean, dry and frost-free (moisture content max. 20%).
UV-Protection-Oil Extra is ready to use, please do not thin. Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
As a general rule, wear a dust mask during sanding works. Do not sand smooth surfaces finer than P120.
If possible, please apply base coat to all sides before nstallation.

Special Note

Fresh wood containing extractives and especially hard wood needs to weather off (for approximately 6
weeks) after installation. Thereby the wood becomes absorbent and the wood finish adheres optimally.
For renovations, clean old microporous wood finiishes thoroughly.
Clean and refresh already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel.
The finished surface is, among other things, influenced by the wood‘s natural characteristics. Therefore, a trial
application is always required, especially for unfamiliar surfaces.
Application

Details

How To Apply Osmo UV Oil

Apply thinly along the wood grain with a Brush or Microfibre Roller and spread
well.
Allow to dry for approx. 12 hours with good ventilation.
Then apply the second coat
Additional Information
Datasheets