How To Apply Polyvine Exterior Varnish
Always apply to a test area before starting work.
Care must be taken when applying in high temperature or direct sunlight as this will effect drying time.
Do not apply when rain is imminent. Coating life will be reduced on horizontal surfaces and where the coating is in contact with the ground or pooled water.
Ensure the product is well mixed. Apply evenly using light brush strokes, following the grain of the wood.
Keep a wet edge and avoid overlaps. Use a good quality brush.
Apply the first coat and allow to dry. On new wood dilute the first coat with 10% water.
Sand lightly to obtain the best finish.
Apply three coats.
3 coats of satin must be applied before the dead flat finish to achieve full protection