All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Polyvine Stone and Brick Protector Dead Flat

Polyvine Stone and Brick Protector Dead Flat
Excl. VAT: £13.82 Incl. VAT: £16.58
- £49.84 - £59.81

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £13.82 Incl. VAT: £16.58
product information

Details

Absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish.

It is a  high performance water-based masonry protector and water repellent ideal for use to seal, protect and decorate a wide range of interior and exterior substrates including stone, plaster, slate and brick, fire places, flagstones, stone window ledges.

Polyvine Stone & Brick Protector is a non-reflective coating and dries to a dead flat finish, which retains the natural look of the substrate.

Protection of the surface begins immediately after application and is complete in approximately 24 hours.

technical specifications

Details

Brand Polyvine
Pack Sizes 1lt, 4lt
Coverage 10 - 20 square metres per litre , depending on the porosity of the material
Drying Time 15 minutes to 1 hour depending on temperature
MPN

VSB1000, VSB4000

GTIN

5030777001325, 5030777001332

overview

Details

Suitable for
• stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges

Unique qualities
• waterproofs brick and stone • suppresses formation of salts on natural masonry surfaces • improves weatherability • a moisture barrier - seals off the surface • resists penetration of grease, oil, acids, alkaline, salts • easily cleaned with mild soap and water

Application

Details

How To Apply Polyvine Stone & Brick Protector

Do not use in temperatures below 5°c/40°f or in very high humidity.

Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.

Mix well before use.  For general applications on masonry, brickwork and stone, a single application will be sufficient.

Recommendations
Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours. NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.

Additional Information
Datasheets