How To Apply Polyvine Decorators Varnish
Gloss or Satin: Apply 2-3 coats.
Deadflat: Apply 1-2 coats.
Dilute 10% with water to prime porous surfaces.
By good quality synthetic brush, recommended, or by conventional spray or High Volume Low-pressure spray.
Rollers are not recommended, stippling may occur.
Stir well. If cissing occurs, rub onto affected area with a damp cloth to break the surface tension and re-apply.
Where a dead flat finish with a high degree of protection is required.
Apply gloss/satin and finish with a thin coat of dead flat.