All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Rustoleum 3333 Super Adhesive Primer

Rustoleum 3333 Super Adhesive Primer
Excl. VAT: £27.46 Incl. VAT: £32.95
- £129.41 - £155.29

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £27.46 Incl. VAT: £32.95
product information

Details

• Water-based primer for use on smooth floors, like power-floated concrete and tiles.

• For use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles.

• Product can be used in combination with all Rust-Oleum® or Mathys epoxy and polyurethane coatings.

• For any other coating, we recommend a test for suitability.
technical specifications

Details

Brand Rustoleum
Sizes 1lt, 5lt
Theoretical Coverage 41m²/l. at 15 µm dry
Thinners Water
Drying Times (at 20˚C): 6 Hours
Application Brush, Roller, Spray
MPN 3333.1, 3333.5
GTIN 8715743008948, 8715743008955
overview

Details

• Perfect chemical bond without blasting or etching

• Low material usage - A real cost saver

• Can be recoated with virtually any other 2K paint

• Water-based; low odour

• Excellent flow

preparation

Details

Before using Rustoleum 3333 super adhesive Primer

Remove grease, oil and all other surface contaminations with an appropriate Degreaser/Cleaning Solution or by alkaline or high pressure (steam) cleaning.

New concrete should cure and dry for at least 30 days prior to the application of the coatings.

The surface must be clean and may be slightly damp during application

Application

Details

how to apply Rustoleum 3333 super adhesive primer

Stir individual components thoroughly before mixing them together.

Use the boxing method or a lowspeed mixer.

APPLICATION CONDITIONS

Temperature of air and substrate between 10 and 35°C and relative humidity below70%.

The substrate temperature must be at least 5°C above dewpoint.

APPLICATION & THINNING: BRUSH

5 up to 10 vol. % with water. Use brushes based on a mixture of synthetic/natural bristles. Checkwet film thickness, avoid excessive film thickness. Preferably use disposable brushes.

APPLICATION & THINNING: ROLLER

10 up to 20 vol. % with water. Use short nap (4-6 mm) mohair or velvet brush rollers. Check wet film thickness, avoid excessive film thickness. Preferably use disposable rollers.

APPLICATION & THINNING: AIR-ATOMISED SPRAY

Up to 20 vol. % with water. Spray: Gravity cup and pressure cup. Tip size: 1.2 -2.0 mm. Atomizing pressure: 2 - 4 bar. Checkwet film thickness, avoid excessive film thickness.

CLEANING OF EQUIPMENT / SPILLS

Immediately after application with (hot) water and soap.

Additional Information
Datasheets