- product information
Should be used for touch-up of galvanised steel surfaces.
Hard Hat Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating.
The product contains pure zinc and aluminium as pigment. Galva-Plus Silver 2120 is intended to be applied on small areas or for touchup.
The product should be used as a single coat in light industrial exposures and corrosive environments.
- technical specifications
Size 500ml For use on
Galvanised steel surfaces
Appearance Metallic Drying times 20°C/50% r.v. To touch
15 Minutes Drying times 20°C/50% r.v. To Recoat Within 2 hours or after 48 hours Binder n/a Heat Resistance n/a Theoretical Coverage1.7 m² per spay can at 25 μm dry 1.7 m² per spay can at 25 μm dry MPN 2120 GTIN
- • Aluminium gloss appearance
- • Similar look to new galvanized
- • For new, bare, rust free metal or galvanised steel
- • Ideal for touching-up of new galvanised
- • Resists 310 hours of salt spray testing (DIN)
- • Heat-resistant up to 150 °C
- • To handle after 1 hour (at 20°C
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
The surface must be clean and dry during application.
DIRECTION FOR USE
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use. Hold can at least 25 cm from surface.
Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.
- Additional Information