All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Rustoleum 5lt 9100 High Performance Epoxy Coating Gloss

Rustoleum 5lt 9100 High Performance Epoxy Coating Gloss
Excl. VAT: £100.38 Incl. VAT: £120.46

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £100.38 Incl. VAT: £120.46
product information

Details

Two-pack, glossy epoxy for metal. Very hard coating with high layer thickness.

technical specifications

Details

Brand Rustoleum
Size 5lt
Sheen Levels Gloss
Thinners 160 (See Data Sheet)
Drying Times (at 20˚C): Touch dry: 6h (9101 & 9101HS)- 8h (9101WG) Dry to handle: 12h (9101 & 9101HS)- 16 h (9101WG) Dry to recoat: After 16h within 72 h Fully cured: 7 days (9101)- 10 days (9101HS & 9101WG) Pot Life: 3h (9101)- 2.5h (9101HS)- 2h (9101WG) Induction Time: 30 min (9101)- 15 min (9101HS)- 20min (9101WG)
Theoretical Coverage 6 m²/l (9101)- 7.3 m²/l (9101HS)- 7 m²/l (9101WG)
MPN 9107.5, 9101.5
GTIN

8715743010811, 8715743010620

overview

Details

    • High build coating (125 microns), very durable
    • Can be applied directly to sound rusted surfaces
    • Easy to apply and clean
    • Full colour intensity in one coat
    • Tintable in virtually any colour on ColourShop®
    • Suitable for metal protection and floors where a heavy duty high build coating is required

9100 Topcoats are designed for application on manually prepared rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces.

9100 Topcoats offer appropriate protection against strong chemicals, acids, alkalis and solvents; frequen

preparation

Details

before using rustoleum 9100 high performance epoxy

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam)cleaning in combination with appropriate detergents.

Sand previous coatings, which are in good condition to remove gloss and to roughen the surface slightly, check compatibility.

The surface must be clean and dry during application.

Steel: Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning to St 2/3 (ISO 8501-01 : 1988). Large areas may be brush-off blasted to Sa 2 (ISO 8501-01: 1988), blast profile max. 50 µm.

For immersion purposes, prepare to Sa 3 (ISO 8501-01 : 1988), blast profile max. 75 µm.

Concrete and masonry: Newconcrete or masonry should cure and dry for at least 30 days before applying the coating system.Remove laitance, any loose or unsound concrete or deteriorated coatings. Smooth concrete should be roughened

Application

Details

how to apply rustoleum 9100 high performance epoxy

Temperature of air and substrate between 10 and 35°C (for the 9100/9101WG between 0 and 15°C) and relative humidity below85%.

The substrate temperature must be at least 3°C above dewpoint.

APPLICATION & THINNING: BRUSH

Use natural bristles, long hair brushes.

Dilute up to 10 vol.% with Thinner 160 (do not dilute 9101HS).

Preferably use disposable brushes.

APPLICATION & THINNING: ROLLER

Use a medium nap polyamide (perlon) 16-20 mm rollers.

Roller application requires 2 coats to achieve recommended d.f.t.

Dilute up to 10 vol.% with Thinner 160 (do not dilute 9101HS)

Preferably use disposable rollers.

APPLICATION & THINNING: AIRLESS SPRAY

Tip size: 0.013-0.021 inch. Fluid pressure: 150 - 225 bar.

Avoid excessive film thickness. Up to 10 vol.% Thinner 160 (do not dilute 9101HS)

APPLICATION & THINNING: AIR-ATOMISED SPRAY Not recommended. CLEANING OF EQUIPMENT / SPILLS RUST-OLEUM Thinner 160.

Additional Information
Datasheets