All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Rustoleum Fluorescent 500ml Aerosols

More Views

Rustoleum Fluorescent 500ml Aerosols
Excl. VAT: £11.55 Incl. VAT: £13.86

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £11.55 Incl. VAT: £13.86
product information

Details

Ideal for stencils, safety markings and colour coding!

Go Further

More paint in the can, resulting in a higher coverage. One HARD HAT® aerosol equals up to 2-3 standard aerosols.

Work Quicker

A higher film build without drips or runs, in one go
Twice the opacity of cheaper paint sprays (saving a cross layer). Normal coverage in one pass. Quicker drying: 10-15 minutes!

Last Longer

Higher quality pigments for a longer gloss and colour retention. The tough flexible film resists chipping, cracking and peeling.

Please Note

For maximum efficiency of fluorescent colours, spray over matt white (2190) and finish with HARD HAT® clear coat (2500)

 

technical specifications

Details

Size 500ml
Heat Resistance 100°C (dry heat), above 65°C discoloration may occur
Appearance Matt / Fluorescent
Drying times 20°C/50% r.v. To touch 15 Minutes
Drying times 20°C/50% r.v. To Recoat 1 Hour
Recoatable with 2500 Transparent Topcoat Aerosol
Best applied over 2190 Matt White Hard Hat Aerosol
Theoretical Coverage 2,1 m² per spray can at 25 μm dry
MPN 2222, 2233, 2242, 2255, 2264
GTIN

8715743006227, 8715743006234. 8715743006241, 8715743006258, 8715743006265

overview

Details

  • • Highly visible fluorescent coatings
  • • Ideal for marking, signs, colour coding, etc.
  • • Apply to HARD HAT 2190 matt white topcoat for the best results
  • • Finish with HARD HAT 2500 clear coat for a long-lasting result
  • • Touch dry after just 30 minutes (at 20°C)
  • • Available in red, orange, yellow, green and blue
preparation

Details

Surface Preparation

Remove dirt, grease, oil and all other surface contaminants by appropriate means.

Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application.

Application

Details

Application Imstructions

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard.

Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface.

Ensure that can is in motion when spray button is pressed to avoid runs and sags.

Apply several thin layers at a few minutes interval to achieve adequate coating thickness.

After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Application Conditions

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Additional Information
Datasheets