- product information
Heat-Resistant spray for temperatures up to 750°C.
Hard Hat 7715 and 7778 should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc.
Provides heat resistance up to 750°C (= 1380°F) dry heat (short term peak resistance) in sheltered or interior environments.
- technical specifications
Size 500ml For use on
New, bare or slightly rusted steel surfaces Appearance Satin Gloss Drying times 20°C/50% r.v. To touch 15 Minutes Drying times 20°C/50% r.v. To Recoat Within 1 hour or after 48 hours Binder Alkyd Heat Resistance
- For peak temperatures up to 750°C
- For continuous temperatures up to 650°C
Theoretical Coverage 2 m² per spray can at 25 μm dry MPN 7715 GTIN
- • For continuous temperatures up to 650°C
- • For peak temperatures up to 750°C
- • For on bare metal or slightly rusted surfaces
- • Ideal for engines, heat cannons, pipes, vents, etc.
- • To handle after 3 hours (at 20°C)
- • Available in black satin-matt and Aluminium
before using rustoleum heat resistant aerosols
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
Sand intact coatings to roughen the surface slightly.
The surface must be clean and dry during application.
how to apply rustoleum heat resistant aerosols
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
- Additional Information