All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Rustoleum ND14 Cleaner/Degreaser

Rustoleum ND14 Cleaner/Degreaser
Excl. VAT: £61.76 Incl. VAT: £74.11

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution.

After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

Colour: transparent.

technical specifications

Details

Brand Rustoleum
Size 5lt
Coverage

100m²/l. (using 1:20 dilution)
Dilution

1 : 20 (5%)
Application

Sponge, cloth, brush or broom
MPN 14.5
GTIN

8715743004049

overview

Details

  • • Removes grease, oil, proteins , dirt and many other contaminants from coated, mineral and metal substrates
  • • Use as additive for high pressure cleaning
  • • Low concentration is sufficient (3-5%)
  • • Non-flammable, virtually odour-free
  • • Can also be applied by brush, mop or broom
Application

Details

how to use rustoleum nd14 degreaser

To ensure homogeneity shakewell before use.

Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. ND14 Cleaner/Degreaser can be applied diluted or concentrated with a sponge, cloth, brush or broom.

For normal cleaning a 3 - 5% concentration will be sufficient. The product should be diluted with cold water.

After use rinsewith plenty of fresh water. If a concentration of more than 5% is used, hot water rinsing is absolutely necessary.

As a high-pressure(steam)cleaning additive a 2% concentration is recommended.

After cleaning, remove any remaining water and allowthe surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Additional Information
Datasheets