All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Rustoleum Pegakote 2K Water Based Floor Epoxy Ready Mixed Colours

More Views

Rustoleum Pegakote 2K Water Based Floor Epoxy Ready Mixed Colours
Excl. VAT: £59.10 Incl. VAT: £70.92
- £221.57 - £265.88

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £59.10 Incl. VAT: £70.92
product information

Details

Two-pack, satin gloss epoxy floor paint for inside use. For garages, warehouses, showrooms, corridors, indoor car parks, workshops etc.

Pegakote® can be applied directly on most mineral substrates (f.i. old concrete, tiles, etc.).

On new concrete or non-porous concrete, remove cement grout by blasting or treatment with Surfa-Etch 108.

Porous substrates shall be impregnated with Pegakote® diluted with 10 to 20% water.

Pegakote® may not be applied on an elastic paint coat or a moving substrate.

Power floated & non porous concrete should be coated with Rustoleum 3333 2 Part Primer

technical specifications

Details

Brand Rustoleum
Pack Sizes 4kg, 15kg
Colours Tiel Red, Ral 7001, Ral 7035, Ral 7016
Finish Satin
Coverage 4.8m²/l. at 100 µm dry
Touch dry (at 20˚C): 9 Hours
Recoatable (at 20˚C): 24 Hours
Recoatable with

9200 Rust-O-Thane®
Application Roller , Spray
MPN

19.8B, 19.7035, 19.7016, 19.7001, 19.4B

GTIN

5413436195427, 5413436195410, 5413436007300, 5413436007294, 5413436007324

5413436007317, 5413436007287, 5413436007270, 5413436195823, 5413436195816

overview

Details

  • • Exceptionally abrasion resistant
  • • Easy to apply and clean
  • • Nice smooth finish
  • • Resistant to oils and solvents
  • • Tintable in virtually any colour on ColourShop®
  • • Water-based formulation, low odour
preparation

Details

SURFACE PREPARATION

The substrate should be dry and clean, free from ascending humidity and sufficiently coherent (tensile strength min. 6 kg/cm²).

Pegakote can be applied directly on most mineral substrates (f.i. old concrete, tiles, glass etc.). Curing compounds in case of poly-concrete have to be removed by means of sand or grit blasting.

On newconcrete or non-porous concrete, remove cement grout by sand or grit blasting, treatment with diluted hydrochloric acid at a ratio of 3 l hydrochloric acid to 10 l water or with Surfa-Etch 108.

For these two last solutions, there is obligation to rinse abundantly and to allowdrying through of the surfaces. Porous substrates shall be impregnated with Pegakote diluted with 10 to 20% water. Pegakote may not be applied on an elastic paint coat or a moving substrate.

You can also apply a thinned coat of Rustoleum 3333 2 Part Grip Primer

Application

Details

DIRECTIONS FOR USE

To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Stir the activator thoroughly using an electrical mixer at lowspeed.

Add progressively under stirring to the base. Stir the mixture thoroughly until an even colour and consistency are obtained during min. 3 minutes. T

emperature of the mixed materials should be at least 10°C. APPLICATION CONDITIONS Minimum 8°C and maximum 80% R.H. APPLICATION & THINNING: BRUSH If necessary, dilutewith water.

APPLICATION & THINNING: ROLLER

Dilute 1st coat with max. 10% water. Apply 2nd coat undiluted.

APPLICATION & THINNING: AIRLESS SPRAY

Nozzle: 015 - 017 / Pressure: 220 bars. 1st coat: dilutewith 5 - 10% water. 2nd coat: dilutewith max. 5% water.

APPLICATION & THINNING: RAKE/TROWEL

Pour the material onto the properly cleaned floor and spread it out evenly with a rake or a trowel.

Treat the surface directly after application with the de-aeration roller to release entrapped air and to promote the self-levelling effect.Maximum DFT: 3mm.

When used as a self-leveling coat, drying times will be slower: 24h for foot traffic.

Additional Information
Datasheets

Details

View File Pegakote Data Sheet Size: (2.16 MB)
View File Pegakote Base Safety Sheet Size: (196.05 KB)