WWhen installing the product, standard personal protective equipment should be worn as a minimum.
These include a dust mask (or similar), safety goggles, heavy duty gloves and overalls.
INSTRUCTIONS FOR USE
Assuming installation using an adhesive as well as screw fixings:
Assuming Concrete Substrate – Drill through the pre-drilled hole markers and insert an appropriate RAWL plug (approx. 30mm No.6).
Then simply run a thin line of mastic down the centre of the underneath of the profile, stopping short of each of the predrilled holes.
Then using stainless steel countersunk head screws (30mm x 5.5mm approx.) fix the Permanent Linemarking to the substrate, allowing the screw head to sit flush on the top surface.