Recently added item(s) ×
You have no items in your shopping basket.
Opening Times 7:30 - 5:30 Sat 7:30 - 4:30
+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*
* Required Fields
• An excellent alternative to traditional gloss paint
• Resistance to cracking, peeling and flaking
• Retains the natural grain of the wood
• Self priming & undercoating
• Can be used on bare wood or over existing gloss paint
• Easy maintenance for future redecoration
Timber surfaces must be suitably prepared, clean and dry.
The moisture content should not exceed 18% prior to coating.
Resinous deposits should be removed.
Degrease any exposed bare timber surface by wiping with a cloth dampened with methylated spirits.
“Knotting agents” should not be used with Sadolin opaque systems.
Fillers specifically designed for use with timber should be used for making good any minor surface defects, imperfections and open joints etc.
General or All Purpose fillers are not suitable.
Only use non - ferrous screws, nails and fixings.
Sadolin Woodshield High Pigment Woodstain should be applied in a full flowing coat ensuring all surfaces and end grains are fully coated.
For best results use a good quality brush specifically designed for use for the application of water borne products.
Pay special attention to end grain, tops and bottoms of doors, and undersides of cills.
Following surface preparation in accordance with the manufacturers recommendations, finish with three full coats of Sadolin Woodshield High Pigment Woodstain
Allowi a minimum of 16-24 hours drying between coats.
The need for maintenance is indicated by a lightening in colour, reduction in sheen as the coating erodes, and a loss of water repellence.
All defective coatings should be completely removed.
Any grey denatured exposed timber surfaces must be thoroughly sanded back to clean, bright timber.
Organic growths must be removed and infected surfaces should be treated with a suitable fungicidal solution.
Remaining sound surfaces should be cleaned using a warm water and mild detergent and rinsed thoroughly with clean water.
Bare timber should be patch primed with one coat of Sadolin Woodshield. Finish with 1 or 2 coats of Sadolin Woodshield as required