All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Sandtex 5lt Trade Fungicidal Solution

Sandtex 5lt Trade Fungicidal Solution
Excl. VAT: £24.35 Incl. VAT: £29.22

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

A concentrated solution for the treatment of organic growth on exterior undecorated and previously decorated surfaces.

Kills algae & mould growth

Can be diluted to suit

technical specifications

Details

Brand Sandtex
Drying Times Leave for 24 hours then rinse with clean water and allow to dry.
Spreading Rate 20 - 30m² per litre when diluted depending on surface suction. On textured surface the spreading rate will vary down to approx. 10m² per litre
MPN 5028977
GTIN 5010281000618
preparation

Details

before using sandtex fungicidal solution

Undecorated surfaces

All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.

Remove all organic growth by scraping or brushing with a stiff bristle brush (not wire).

Heavy long established growth is best removed by pressure washing between 1500-2000 psi (102-136 bar), wet or dry grit blasting.

Care must be taken not to damage the underlying surface.

Any spores must then be killed with an application of Sandtex Trade Fungicide diluted one volume of Fungicide with up to two volumes clean water.

Leave for 24 hours and rinse with clean water. Allow to dry.

Previously decorated surfaces

All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.

Remove all loose, and failing or suspect material by scraping or brushing with a stiff bristle brush (not wire) to a sound edge.

Remove all organic growth by scraping or brushing with a stiff bristle brush (not wire).

Heavy long established growth is best removed by pressure washing between 1500-2000 psi (102- 136 bar), wet or dry grit blasting.

Care must be taken not to damage the underlying surface.

Any spores must then be killed with an application of Sandtex Trade Fungicide diluted one volume of Fungicide with up to two volumes clean water.

Leave for 24 hours and rinse with clean water.

Allow to dry

Application

Details

APPLICATION

Apply liberally using a synthetic bristle brush and scrub well into the surface.

CLEANING

Wash with clean water immediately after use.

Additional Information
Datasheets