All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Sandtex Flexigloss X-tra Brilliant White

Sandtex Flexigloss X-tra Brilliant White
Excl. VAT: £25.61 Incl. VAT: £30.73
- £46.20 - £55.44

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £25.61 Incl. VAT: £30.73
product information

Details

A high-performance exterior gloss system which provides greater resistance to cracking and flaking than traditional gloss.

technical specifications

Details

Brand Sandtex
Pack Sizes 2.5lt, 5lt
Coverage Up to 18sq.mtrs per litre
Touch Dry 4-6 hours
Recoatable 16 hours
MPN 5041097, 5041116
GTIN
preparation

Details

before using sandtex flexigloss x-tra

New timber surfaces

All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied, with a moisture content not exceeding 18%. Rub down with a suitable grade of abrasive paper and round sharp edges 1-3mm.

Remove all dust.

Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.

Treat knots with two thin coats of fresh knotting.

Fill any fixing holes, open joints and shallow surface defects

 Rub down with a suitable grade of abrasive paper. Remove all dust.

Prime with one coat of Sandtex Trade Flexible Primer Undercoat.

Previously decorated timber surfaces

All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied.

Remove all loose, and failing or suspect paint.

Prior to painting the moisture should not exceed 18%.

Remove grey and denatured surfaces by rubbing down with abrasive paper or by mechanical means and round sharp edges 1-3mm.

Feather edges of sound paint.

Remove all dust.

Organic growth must be removed and the area treated with Sandtex Trade Fungicide.

Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin.

Treat knots with two thin coats of fresh knotting.

Fill any fixing holes, open joints and shallow surface defects

Rub down with a suitable grade of abrasive paper.

Remove all dust.

Spot prime all bare areas with one coat of Sandtex Trade Flexible Primer Undercoat.

Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.

Wet abraded to provide a key.

Rinse with clean water to remove all residues. Allow to dry. B

ring forward spot primed areas and undercoat overall with one liberal coat of Sandtex Trade Flexible Primer Undercoat.

COATING SYSTEM

New / unpainted woodwork Following appropriate surface preparation apply one liberal coat of Sandtex Trade Flexible Primer Undercoat and finish with two full coats of Sandtex Trade Flexigloss X-tra.

Previously painted woodwork Following appropriate surface preparation and spot priming, apply one liberal coat of Sandtex Trade Flexible Primer Undercoat overall and finish with one liberal or two full coats of Sandtex Trade Flexigloss X-tra. 

Application

Details

how to apply sandtex flexble gloss x-tra

Stir well before use.

Apply by brush to an even thickness (a good quality bristle or suitable designed synthetic brush gives best results). Maintain a wet edge.

On timber lay off in the direction of the grain

aftercare

Details

Between maintenance redecoration surfaces may be washed with a warm water and liquid detergent solution to remove surface dirt. 

Additional Information
Datasheets