All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Treatex 1ltr Teak Protector

Treatex 1ltr Teak Protector
Excl. VAT: £20.86 Incl. VAT: £25.03

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

Treatex Teak Protection is a solvent free exterior wood finish containing pigments which block damaging UV rays.

Treatex Teak Protection is the ideal finish for garden furniture, boat decks and other exterior joinery.

Teak Protector is manufactured with sustainable raw materials including linseed oil and sunflower oil.

Treatex Teak Protection is designed for use on timbers like teak and is not suitable for timbers which contain tannins, such as oak. 

1 litre covers approximately 15m2 one coat depending on timber and method of application

technical specifications

Details

Brand Treatex
Pack Sizes 1lt
MPN 31100E
GTIN 5060310660481
overview

Details

  • • UV resistant
  • • Highly water resistant
  • • Solvent free
  • • Safe for use on children’s toys
  • • Suitable for indoor and outdoor use
  • • Will not flake or peel

preparation

Details

before using treatex teak protection

Treatex Teak Protection will only work on unfinished timber.

Previous finishes must be fully removed prior to application.

If timber is grey and weathered then it should be sanded back to restore its natural colour before application.

Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc.

We advise that when using Treatex Teak Protection, sufficient product is purchased to complete the whole project and when more than one tin is required

it is advisable to mix them together before use.

Timber must have a moisture content below 18%.

Temperature must be greater than 8OC during application and drying.

A trial application is essential prior to starting the project.

Application

Details

how to use treatex teak protection

Stir container thoroughly, before and during use.

Use a brush to evenly apply Treatex Teak Protection in the same direction as the wood grain, allowing approximately 60-70ml per m2.

This product works best when the second coat is applied ‘wet on wet’.

This means a second coat should be applied, in the same way as above, before the first coat is dry.

After the second coat leave to dry for approximately 12 hours.

Additional Information
Datasheets

Details