- product information
Treatex Douglas Fir Protection is a solvent free exterior wood finish which offers long lasting weather protection.
It is manufactured on a base of natural sustainable raw materials including linseed oil, sunflower oil and soybean oil.
- technical specifications
Brand Treatex Pack Size 2.5lt Coverage
2.5L will cover approximately 20m² in one coat depending on timber and method of application.
Useage Interior & Exterior Recommended Timbers Douglas Fir Application Decking, garden furniture & fences MPN 31400H GTIN 5060310660511
- • Easy to apply
- • UV resistant
- • Highly water resistant
- • Solvent free
- • Safe for use on children's toys
- • Not suitable for high tannin content timbers e.g. oak
- • Will not flake or peel
before applying treatex douglas fir protection
Treatex Douglas Fir Protection will only work on unfinished timber.
Previous finishes must be fully removed prior to application.
Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc.
Timbers susceptible to decay, mould and fungi should be treated first with a suitable preservative.
We advise that when using Treatex Douglas Fir Protection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use.
Timber must have a moisture content below 18%.
Temperature must be greater than 8º
how to apply treatex douglas fir protection
Do not apply in damp, humid conditions.
Stir container thoroughly, before and during use.
Use a brush to evenly apply
Treatex Douglas Fir Protection in the same direction as the wood grain, allowing approximately 125ml per m².
Pay particular attention to end grain, on end grain apply wet on wet until product is no longer absorbed by the timber.
After approximately 3-6 hours the first coat can be overcoated.
The second coat must be applied within 24 hours.
Apply with a brush a second coat of Treatex Douglas Fir Protection, again allowing roughly 125ml per m².
After the second coat it will take up to 24 hours for the product to fully dry.
- Additional Information
DetailsTreatex Douglas Fir Protection safety Sheet Size: (194.02 KB)