All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Treatex 2.5lt Stain Inhibitor

Treatex 2.5lt Stain Inhibitor
Excl. VAT: £44.51 Incl. VAT: £53.41

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

Tannins are naturally occurring compounds found within wood.

They are carried to the timber surface by moisture, 'bleeding' through any finish, leaving a yellowish-brown stain.

These stains are more noticeable on lighter coloured finishes, especially white.

Treatex Stain Inhibitor is an easy to apply primer which is designed to help prevent tannins from migrating to the surface of the timber and causing unsightly staining.

Exterior timbers with high tannin levels e.g. Oak, Idigbo, Teak, Cedar and Mahaogany) should be treated with Treatex Stain Inhibitor before being sealed with Treatex Classic Colour Collection. 

technical specifications

Details

Brand Treatex
Pack Size 2.5lt
Coverage

2.5L will cover approximately 30m² in one coat depending on timber and method of application.

Useage Exterior
Recommended Timbers Oak, Idigbo, Teak, Cedar and Mahaogany
Application Timbers with high tanning. As a sealer for Classic Colour Stain
MPN 41200H
GTIN
preparation

Details

before applying treatex stain inhibitor

Previous finishes must be fully removed prior to application.

Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt or dust.

Exterior timbers susceptible to decay, module and fungi should be treated first with a Preservative.

The timber must have a moisture content below 18%.

Temperature must be greater than 8º

Application

Details

how to apply treatex stain inhibitor

Stir tins thoroughly, before and during use.

Use a brush or roller to evenly apply Treatex Stain Inhibitor in the same direction as the wood grain, allowing approximately 85ml per m².

Leave for approximately 24 hours to dry and then overcoat with Treatex Classic Colour collection.

Additional Information
Datasheets

Details