All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Treatex External Oak Protection

Treatex External Oak Protection
Excl. VAT: £22.38 Incl. VAT: £26.86
- £54.26 - £65.11

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £22.38 Incl. VAT: £26.86
product information

Details

Treatex External Oak Protection has been developed as a top coat to protect the pigments in Treatex External Oak from the worst of the climate.

This is based on the same natural sustainable oils that are used in our highly successful Hardwax Oil range including a modified alkyd resin, linseed oil and waxes, with an addition of siccatives for faster drying times.

Its is free from lead and cobalt and contains no biocides or preservatives.

Whilst this product does contain UV inhibitors, it is not recommended as a finish on its own.

technical specifications

Details

Brand Treatex
Pack Sizes 1lt, 2.5lt
Basecoat Treatex External Oak Virgin Oak
Coverage 1 litre covers approximately 20m2 one coat depending on timber and method of application.
2.5 litres covers approximately 50m2 one coat depending on timber and method of application.
MPN 31550H, 31550E
GTIN 5060310660757, 5060310660733
overview

Details

  • • Part of a 2 product system
  • • UV and water resistant
  • • Suitable for indoor and outdoor use
  • • Contains no biocides or preservatives
  • • Contains UV inhibitors
preparation

Details

Ensure the previously applied Treatex External Oak is clean and dry.

The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oc.

The tin should be kept at room temperature prior to use.

When using Treatex External Oak Protection, we advise that sufficient product is purchased to complete the whole project and where more than one tin is required it is advisable to mix them together before use.

We strongly recommend a trial application prior to starting a project.

Application

Details

To be used as a top coat for finishing timbers treated with Treatex External Oak. Stir tins thoroughly and apply with a good quality brush.

Allow to dry for at least 12 hours and then apply a second coat.

Tips

Wet brushes and rollers can be cleaned with white spirit.

Store tins in a cool and frost free environment.

Unopened tins will last for five years.

Once tins are opened, transfer contents to smaller airtight container.

Additional Information
Datasheets

Details