All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Treatex External Oak Regency

Treatex External Oak Regency
Excl. VAT: £23.00 Incl. VAT: £27.60
- £55.78 - £66.94

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £23.00 Incl. VAT: £27.60
product information

Details

Treatex External Oak has been developed as a base coat to treat timbers like Oak and Idigbo.

Suitable for use externally and internally,

it provides a high class finish that leaves the wood looking natural.

Areas of application include doors, windows and fascia boards as well as all other external woodwork.

Treatex External Oak is based on the same natural sustainable oils used in Hardwax Oil range including a modified alkyd resin, linseed oil and waxes, with an addition of siccatives for faster drying times.

It is free from lead and cobalt and contains no biocides or preservatives.

It comes in two colours: Virgin Oak and Regency Oak.

technical specifications

Details

Brand Treatex
Pack Sizes 1lt, 2.5lt
Topcoat Treatex External Oak
Coverage 1 litre covers approximately 20m2 one coat depending on timber and method of application.
2.5 litres covers approximately 50m2 one coat depending on timber and method of application.
MPN 3151E, 3151H
GTIN
overview

Details

  • • Part of a 2 product system
  • • UV and water resistant
  • • Suitable for indoor and outdoor use
  • • Contains no biocides or preservatives
  • • Contains UV inhibitors
preparation

Details

Preparation

Prior to application all previous finishes must be removed as Treatex products work by absorption.

Surfaces should be sanded with 100-120 grit sandpaper and all external sharp edges should be rounded to approximately 3mm (5mm on cill front).

The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oc.

The tin should be kept at room temperature prior to use.

When using Treatex External Oak, we advise that sufficient product is purchased to complete the whole project and where more than one tin is required it is advisable to mix them together before use.

We strongly recommend a trial application prior to starting a project.

Application

Details

To be used as a top coat for finishing timbers treated with Treatex External Oak. Stir tins thoroughly and apply with a good quality brush.

Allow to dry for at least 12 hours and then apply a second coat.

Tips

Wet brushes and rollers can be cleaned with white spirit.

Store tins in a cool and frost free environment.

Unopened tins will last for five years.

Once tins are opened, transfer contents to smaller airtight container.

Additional Information
Datasheets

Details