All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Treatex Hardwax Oil Natural

Treatex Hardwax Oil Natural
Excl. VAT: £23.19 Incl. VAT: £27.83
- £58.63 - £70.36

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £23.19 Incl. VAT: £27.83
product information

Details

Treatex Hardwax Oil Natural is a tough professional finish for floor boards and other interior wood.   

This oil system dries very quickly, two coats can be applied within 8 hours.

Natural Hardwax Oil contains a small amount of white pigment which allows it to be used in two different ways:

1. Base coat

If you prefer to protect light timbers whilst changing the unfinished colour as little as possible then Treatex Natural Hardwax Oil can be applied as a base coat underneath two coats of Treatex Clear Hardwax Oil to neutralise the warming effect. 

2. Top coat:

For a purer white, seal Spruce Colour Tone with two coats of Natural Hardwax Oil. When Treatex Clear Hardwax Oil is applied on top of our Spruce Colour Tone it can have a slight yellowing effect on the colour.

technical specifications

Details

Brand Treatex
Pack Sizes 1lt, 2.5lt
Coverage 1L will cover approximately 20m² in one coat depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.
MPN 1105E, 1105H
GTIN 5060310660108, 5060310660115
overview

Details

  • • Easy to apply 
  • • Quick drying
  • • Low odour
  • • Should not be used on darker timbers
  • • Meets with VOC emissions regulations
  •  •Tinted with natural pigments
  •  • Keeps lighter timbers from warming when Hardwax Oil is applied
preparation

Details

Please Note

We advise that when using Natural Hardwax Oil, sufficient product is purchased to complete the project and when more than one tin is required it is advisable to mix them together before use.

Application

Details

Method 1 – as a base coat.

Natural Hardwax Oil should not be used as a base coat on darker coloured timbers. To change the appearance of light coloured timbers as little as possible, brush (not roller) on a thin coat of Natural Hardwax Oil. To avoid a patchy finish it is important that the Natural base coat is applied evenly.

To avoid overlap marks wipe the wet surface lightly with a lint free cloth to distribute the colour evenly. Allow to dry.

Once dry, seal with two coats of Treatex Clear Hardwax Oil 

Method 2 – as a top coat.

For a brighter white seal our Spruce Colour Tone by using a brush or roller to evenly apply Natural Hardwax Oil allowing roughly 50ml per m².

Allow to dry then apply with a brush or roller a second coat of Natural Hardwax Oil, again allowing roughly 50ml per m². Allow to dry thoroughly overnight before the surface is lightly used. 

Additional Information
Datasheets

Details