All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Window Care Dry Fix 16

Window Care Dry Fix 16
Excl. VAT: £30.97 Incl. VAT: £37.16

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

Elastic wood stabiliser for DRY FLEX® 16.

 If you have no time restraints and can leave your repair overnight, then the 16-hour system Window Care Dry Fix 16 is the best Window Care system product in the range for a durable solution to the curative and preventative treatment of timber . 

  • • Ensures maximum bonding of the repair compound (DRY FLEX® 16) to the substrate.
  • • Low viscosity and solvent-free to penetrate quickly and deeply into the wood.
  • • Strengthens the fibres of the wood.
  • • Easy to apply with a brush.
technical specifications

Details

Brand Repair Care
MPN 2011002
GTIN 8714748004207
overview

Details

preparation

Details

before using window care dry fix 16

Check the moisture content of the surface (maximum 18%) and the condition of the wood

Ensure that all decayed or excessively soft wood, and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved

All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination.

Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood.

Sand the wood surface before the product is applied.

Application

Details

how to apply window care dry fix 16

On all applications, use a brush to pre-treat the affected area with DRY FIX® 16, before applying DRY FLEX® 16.

Allow a minimum of 20 minutes and a maximum of 8 hours for the DRY FIX® 16 to penetrate the surface of the timber.

Remove any excess DRY FIX® 16 which has not penetrated into the wood with absorbent paper.

Apply DRY FLEX® 16

Refer to Data sheet fir full information

Additional Information
Datasheets