All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Zinsser 2.5lt Ceiling Pro 5 in 1

Zinsser 2.5lt Ceiling Pro 5 in 1
Excl. VAT: £34.96 Incl. VAT: £41.95

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

product information

Details

Achieving a seamless ceiling is not usually an easy task, but thanks to the ground-breaking paint technology of Ceiling Pro 5 in 1 from Zinsser everyone can enjoy a perfectly finished ceiling.

As with any job when it comes to transforming a ceiling, good preparation is still crucial but now the days of using multiple products to seal, prime and finish are long gone. Zinsser’s Ceiling Pro 5-in-1 is a quick drying, water-based, low odour product which seals, primes, blocks stains and finishes, while bridging hairline cracks, all in one application.

Touch dry within just 30 minutes and with a recoat time of one-hour, this specialist paint is suitable for both bare and previously painted ceilings and will adhere to any surface.

technical specifications

Details

Brand Zinsser
Pack sizes 2.5lt
Coverage 10m2 per Litre
Touch Dry 30 Minutes
Full Cure 4 Hours
MPN

ZN7380002C1

GTIN 5037898614137
overview

Details

  • • Touch dry in 30 minutes - 1 hour recoat
  • • High hiding - stain sealer
  • • Low odour
  • • For bare and previously painted ceilings
  • • Water-based, non yellowing finish
preparation

Details

 Before Using Zinsser Ceiling Pro

Ensure surfaces are clean, dry and free of any contamination.

Remove any existing mould or mildew before painting. Any excessive dusting of new surfaces should be removed prior to painting.

Ensure surface has moisture content of less than 15%.

Exposed nail heads should be countersunk and filled before coating with ZINSSER CEILING PRO 5-IN-1.

Application

Details

 Application Method

Stir thoroughly before use.

Zinsser Ceiling Pro can be applied by brush, roller or airless spray.

If spraying use tip size 0.015” - 0.019” at 2000 – 2500 psi.

For brush and roller no thinning is required. 

If spraying, ZINSSER CEILING PRO 5-IN-1 may be thinned up to 5% with clean water.

Additional Information
Datasheets