- product information
Wallpaper Cover-Up is an all-in-one primer, sealer and stain blocker.
A high hiding primer that obliterates wallpaper print with a smooth matt off-white finish.
Can be used under any coloured emulsion.
Zinsser’s Wallpaper Cover Up can be applied by either brush or roller (for best results use a short pile mohair or microfibre roller).
Unlike a regular emulsion which can cause wallpaper to bubble and blister,
Zinsser’s Wallpaper Cover Up seals the wallpaper protecting it from the moisture in the paint and once dry, this one-coat system creates a new surface that’s easy to paint.
Zinsser’s Wallpaper Cover Up also includes a stain blocker, seeping stains from smoke and damp residue are easily covered with no fear of re-emergence.
- technical specifications
Brand Zinsser Pack sizes 2.5lt Coverage 5-8m2 per Litre Touch Dry 2 - 4 Hours Full Cure 4 Hours MPN
- • Obliterates wallpaper print
- • Prevents blistering of wallpaper
- • Blocks water soluble stains
Before Using Zinsser Wallpaper Cover-Up
For best results, ensure surface is smooth, clean, dry and free from any surface contaminants.
Wallpaper must be well adhered to the surface.
Stir thoroughly before use.
Apply when temperature is between 10-30o C to ensure proper drying.
Best results are achieved by roller application – Use a short pile (up to 5mm) mohair or microfibre roller.
Apply evenly and avoid overspreading.
If applying by brush, load generously and avoid overspreading.
For very dark wallpapers or those which have a contrasting print, obliteration can be improved by using a ‘wet on wet’ rollering technique.
15-30 minutes after application, roll over the applied surface again using a lightly loaded roller.
- Additional Information