- product information
AllWeather Exterior Masonry Paint is an ultimate performance, exterior masonry paint that can be used on bare or previously painted masonry at low temperatures. Designed for the long term decoration of bare or previously painted concrete, render, stone and brickwork.
Contains a biocide to protect the dried coating against fungal degradation.
AllWeather Exterior Masonry Paint gives excellent resistance against cracking, blistering and flaking and protects against rain and severe weather.
The product provides a long lasting finish, is easy to apply and has excellent colour retention.
It dries even in low temperatures so can be used all year round.
Designed for all exterior masonry surfaces, AllWeather Exterior Masonry Paint is ideal for new or previously painted render, stucco, brick, stone, cured concrete and more. In many instances
Self-priming it will bond to existing paints without sanding so for many refurbishing jobs there is no need to purchase a separate primer.
After removing existing mould and mildew, two coats of AllWeather Exterior Masonry Paint will ensure that any exterior looks bright and beautiful for years.
*This product contains a biocide to protect the dried film from fungal & algal degradation. Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.06% by weight
- technical specifications
Brand Zinsser Size 5lt Colour White Coverage 12m2 per Litre Touch dry 1 - 2 hours Full cure 7 days Recoatable 3 hours
- • Can be applied down to -5°C
- • Showerproof in 20 minutes
- • Excellent resistance against cracking, blistering and flaking
- • Easy application self-priming system
- • Excellent colour retention
- • Flat matt breathable finish
- • Resists attack by alkalis and acid
Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion.
Remove all loose or peeling paint and chalky paint residue.
Sand edges of any remaining paint film until smooth.
Special precautions should be taken during surface preparation of pre - 1960 paint surfaces as they may contain harmful lead.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
New concrete, masonry and other related surfaces must be cured for at least 30 days before priming.
Remove all existing mould and mildew before painting.
To effectively remove mould and mildew, use a Fungicidal Wash.
Before painting, fill all nail holes and gouges.
The moisture content of the substrate should be less than 16%.
For bare or porous surfaces it is advisable to apply a ‘mist coat’ of AllWeather Exterior Masonry Paint, thinned 10% with white spirit.
Two coats are normally applied.
Shake or stir well before using.
Apply with synthetic bristle brush, roller or sprayer.
For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure.
Apply when air and surface temperatures are between -5° and +32°C and humidity is less than 85%.
Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping.
- Additional Information