All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Zinsser Bulls Eye 1-2-3

Zinsser Bulls Eye 1-2-3
Excl. VAT: £7.46 Incl. VAT: £8.95
- £51.88 - £62.26

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £7.46 Incl. VAT: £8.95
product information

Details

Zinsser Bulls Eye 1-2-3 - Interior and exterior, water-based, primer sealer suitable for all types of surfaces ideal for permanently blocking stains in and out.

It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.

Excellent Adhesion - Zinsser Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel.

 

technical specifications

Details

Brand Zinsser
Pack sizes 500ml 1lt, 2.5lt, 5lt
Coverage 10m2 per Litre
Touch Dry 30 Minutes
Full Cure 1 Hour
MPN

ZN7040001E1, ZN7040001D1, ZN7040001C1, ZN7040001A1

GTIN 5037898610238, 5037898610221, 5037898610214, 5037898610207
overview

Details

  • • Tintable to most pastel, mid-tone and deep-tone shades
  • • Suitable for Interior and exterior use
  • • Adheres to all surfaces without sanding
  • • Seals stains, graffiti and tannin bleed
  • • Contains a biocide that protects the dried coating against fungal degradation
  • • Rust inhibititor – great for new metal
  • • Dries in 30 minutes, ready to coat again in 1 hour
preparation

Details

Surface Preperation

Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mould, wallpaper adhesive or any contamination that may interfere with adhesion

For full instructions on use of this product please refer to the attafned data sheet

Application

Details

Ready to use 

No dilution necessary. In most cases only one coat is necessary.

Porous surfaces may require two coats to properly seal.

Prime entire surface for best results.

Thinning

If thinning is necessary add no more than 10 % clean water and stir thoroughly.

Note that thinning the primer may affect its stain blocking properties.

Application

Can be applied by brush, roller or spray

Additional Information
Datasheets

Details