All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS
IN STORE SHOWROOM IN STORE SHOWROOM WALLPAPER & FABRICS
CLICK & COLLECT CLICK & COLLECT See Online Store
PROFESSIONAL ADVICE PROFESSIONAL ADVICE PRODUCT EXPERTS

Zinsser Watertite Waterproofing Paint - White

Zinsser Watertite Waterproofing Paint - White
Excl. VAT: £60.86 Incl. VAT: £73.03
- £118.62 - £142.34

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £60.86 Incl. VAT: £73.03
product information

Details

Zinsser Watertite Paint is guaranteed to keep water out. Ideal for basements and cellars, this white waterproofing paint from  has been specially designed to give an excellent finish to masonry.

Zinsser Watertite waterproofing paint contains a biocide that protects the dried coating against fungal degradation for a minimum of 5 years. It can easily be applied to wet or dry surfaces creating a smooth, non-gritty finish.

technical specifications

Details

Brand Zinsser
Pack sizes 5lt, 10lt
Coverage 2m2 per Litre
Touch Dry 1 Hour
Full Cure 7 - 14 Days
MPN

ZN7110001A1, ZN7110001N1

GTIN 5037898610412, 5037898610405
overview

Details

  • • Guaranteed to stop up to 34psi of water pressure
  • • Prevents fungal degradation on the paint film for 5 years – guaranteed!
  • • Smooth, non-gritty finish applies easily to wet or dry walls.
  • • Ideal for basements and other interior / exterior surfaces.
  • • Ultra low odour solvent-based formula.
preparation

Details

New Or Painted Masonry

Surface must be clean and free of dirt, grease, oil, soap and other contaminants. New masonry must cure at least 30 days before applying

Previously Painted Surfaces

WATERTITE® is designed to produce a waterproof finish when applied to bare masonry.

It can be used over previously painted surfaces, however its waterproofing ability is then dependent upon the integrity of the previous coating.

For best results, remove as much of the old coating as possible by manually scraping the surface, followed by thorough wire brushing.

A belt power sander with a 50 grit sanding belt is also effective

Application

Details

How To Apply

Do not thin

Watertite can be applied by brush or roller

To ensure against accumulation of solvent vapours, be sure to open all windows and doors.

Use a nonsparking exhaust fan to provide air movement.

Extinguish all flames and pilot lights at water heaters and heating systems.

Turn off air/heating systems at thermostat. Walls can be damp, but must be free of active water leaks.

Stir thoroughly before and during application. 

For full information please read the attached Data sheet before use

Additional Information
Datasheets

Details